Attribute Description NSF-H1 Registration: Conforms to the requirements of the NSF Nonfood Compounds Registration Program, registered number 136845, category HT1 for Heat Transfer Fluids with incidental food contact. Cold carrier Function: Drinking water antifreeze prevents freezing in drinking water systems and other relevant systems down to -50°C. Mixed with the right amount of water, it provides protection against limescale deposits and does not attack rubbers, plastics and metals. Compatibility: Compatible with most other heat transfer fluids based on propylene glycol. For optimal corrosion protection, exclusive use is recommended, with dilution in demineralized water according to specific guidelines. Applications: Suitable for water tanks of boats, caravans and mobile toilets. It is non-toxic, readily biodegradable and offers high corrosion protection, especially on metals such as copper and aluminum that are often used in the food industry. Toxicity and Safety: Product consists of 100% FDA approved raw materials for incidental food contact. Provides excellent protection against corrosion and has low toxicity, making it very suitable for use in the food industry. Available Packaging: Available in 5 liter (Art. No. 83655), 25 liter (Art. No. 83682), and 205 liter (Art. No. 83692) packages, suitable for various applications. Instructions for useRinse the tank and pipes thoroughly with tap water before use. This product is compatible with most other heat transfer fluids based on propylene glycol and should only be diluted with clear, colorless and odorless water that meets the following requirements: Total hardness: max. 2.8 °dH (German hardness degrees) Chlorides (Cl-) : max. 50 mg/l Iron and copper concentration: max 0.5 mg/l Electrical conductivity: max 10 μS/cm pH at 20°C: 5 – 7< /li>

Attribute Description Chemical Stability: Bardahl Vaseline is a homogeneous hydrocarbon mixture that is chemically stable and does not tend to harden, which prevents corrosion. Color and Consistency: Has a clear white color and has been developed to meet the requirements of a wide range of practical applications. The product is insoluble in water. Versatile Applications: Suitable for a wide range of applications including battery protection in vehicles, industrial, marine and agricultural. Properties: Water-repellent, anti-corrosion, with very good adhesion and is acid-free. Resistant to wear, weather influences, weak acids and bases. Specific Applications: Protection of battery terminals, tools and mechanical parts. Suitable for automotive applications such as sliding roof guides, locks, hinges and more. Analytical Data: Density at 80°C: 800 kg/m³ typ., Pour point: 50-56°C, Cone penetration: 100-120 mm/10, Dropping point: 42-60°C, Viscosity at 100°C: 5.0 mm² /s typ., Temperature range: 38-64°C. Storage: Should be protected from heat, humidity, dust, and light outdoors. Item number and Contents: Item number 77805 with a capacity of 500 grams.

Attribute Description Versatile Marine Lubrication: Bardahl Universal Shipping Grease, designed for the lubrication and sealing of propeller shafts, is also ideal for use as a lubricant for plain and ball bearings, making it a versatile lubricant on board. Excellent Protective Properties: Provides superior anti-corrosion, EP and anti-oxidation properties, and has excellent resistance to both fresh and salt water, making it ideal for the marine environment. Good Adhesion and Stability: Has good adhesion properties and high mechanical stability, allowing the grease to remain in place for a long time under heavy operating conditions. Safe for Various Materials: Is easily pumpable in automatic lubrication systems and does not attack rubber, making it safe for use with a wide range of materials. Analysis Data: Includes detailed technical specifications such as a lithium-calcium thickener, mineral base oil, excellent resistance to oxidation and corrosion, and a wide temperature range from -25ºC to 120ºC. Available Packaging: Available in different packages from 400 gr to 20 kg, making it suitable for various applications and ease of use on board.

Attribute Description Effective Soot Cleaning: Removes soot deposits in the turbo without disassembly, prevents variable turbo vanes from getting stuck. Prevention Attack: Prevents deposits on turbo blades caused by poor combustion of soot particles. Improved Soot Combustion: Improves the combustion and destruction of unburned soot particles in the turbo. Efficiency and Capital Preservation: Prevents excessive fuel consumption and power loss. Turbo lifetime: Extends the lifespan and maintains the proper functioning of the turbo. Instructions for use: With a warm engine, pour the full can into the fuel tank of at least 30 liters and a maximum of 60 liters of diesel. Drives with a high speed (in low gears up to +/- 3500RPM). Empty the tank as much as possible before driving refueling again. This way the Bardahl Turbo Cleaner gets maximum opportunity to clean.

Attribute Description Lubrication and Protection: Lubricates and protects the upper part of the piston and keeps the fuel system clean. Ideal for fuels such as E10 petrol, LPG, natural gas and (bio) diesels. Reduces Engine Problems: Prevents power loss, oil consumption and wear caused by carbon and varnish deposits on piston rings, cylinder walls and valves. Cleansing Effect: Softens carbon and gum deposits, causing them to dissolve over time and burn with the fuel. Compatibility: Suitable for all engines, including those equipped with catalytic converters & particulate filters meet the strict EUR6 standard. Availability: Available in different packages: 500 ml, 5 liters, 25 liters, 60 liters, and 210 liters. Instructions for use:To be added at a ratio of 1:1000 (25ml Top Oil per 25 liters of fuel). Self-mixing in the tank. First add Top Oil, then refuel.

Attribute Description Specific Bonding Agent: Bardahl Threadlock T442 is designed for sealing and securing threaded ends of metal pipes and fittings within pneumatic and hydraulic systems up to R ¾”. It is semi-permanent and demountable. Scope of application: Suitable for use on parts with fine to medium threads that require semi-permanent locking. Benefits: Manufactured under ISO9000 and 9001 with excellent durability and consistent performance on both active and inactive surfaces, without compromising the hydraulic and pneumatic systems. Analytical Data: Characterized by a brown color with a viscosity of 400-700 mPas, a temperature range of -50° to 130°C, and a maximum wire diameter of 0.15mm. Curing time varies from 10-20 minutes for initial strength to 3-6 hours for full cure. Anaerobic Action: Fills microscopic irregularities for better power transmission, prevents spontaneous loosening due to vibration, and provides a moisture, penetration and corrosion resistant seal. Item number and Contents: Item number 97031 with a capacity of 50 ml. Instructions for use: Recognisable by its brown color. Make sure parts are clean and dry before use. Disassembly is simplified with heat. The use of primers is possible, but can reduce the bonding strength by up to 30%.

Attribute Description Very Strong Locking Agent: Bardahl Threadlock T171 is a thread locking agent that prevents vibrations, leakage and corrosion. Suitable for sealing and securing threaded ends up to M36, provides very strong adhesion but remains removable. Scope of application: Eliminates the need for various tools and welds in hard-to-reach places. Intended for permanently secured connections with fine to medium threads. Unique Features: Recognizable by its green color and chemically inert, ideal for use in extreme environments such as cold stores, and industries with corrosive chemicals. Benefits: ISO9000 and 9001 certified, provides excellent shelf life, consistent performance, prevents leakage and corrosion, and does not affect hydraulic/pneumatic systems. Anaerobic Action: Fills irregularities for better power transmission, prevents spontaneous loosening due to vibration, and provides a moisture, penetration and corrosion resistant seal. Analytical Data: Characterized by a green color, a viscosity of 4000-6000 cPs, tensile strength at break of 17/8 Nm, applicability at temperatures from -50° to 130°C, and a full curing time of 24 hours. Item number and Contents: Item number 97011 with a capacity of 50 ml.

Attribute Description Versatile Locking Agent: Bardahl Threadlock T142 prevents loosening due to vibration, leakage, and corrosion, and is suitable for sealing and securing threaded ends up to M36. The product is demountable and offers an alternative to various ineffective methods. Scope of application: Suitable for parts with fine to medium threads that require semi-permanent securing, such as in cold stores, installation technology, and industries working with corrosive chemicals. Simple Identification: Identified by its blue color, Bardahl Threadlock T142 is known for its chemical inertness and is effective under a variety of conditions, including extreme temperatures. Benefits: Manufactured under ISO9000 and 9001, it offers excellent shelf life, consistent performance on active and inactive surfaces, prevents leakage and corrosion without unnecessary mounting forces, and has an excellent service life with good chemical and physical properties. Anaerobic Action: Fills microscopic irregularities in threads, prevents spontaneous loosening due to vibration, and increases the strength of precision-fitting parts by sealing against moisture, penetration, and corrosion. Item number and Contents: Article number 97001 with a capacity of 50 ml.

Attribute Description Versatile Applications: A penetrating oil, lubricant, moisture remover, anti-corrosion spray and contact spray in one. Designed to protect against rust and corrosion, reduce friction and wear, and loosen rusted parts. 2-Way Straw Technology: Provides a flexible application with a nozzle that can be used in two positions: up for direct, targeted application and down for wide distribution. Ensures easy use in various maintenance situations. 360 Degrees Usage: The penetrating oil can be used in any position, 360 degrees. This ensures that the spray can be completely emptied, which minimizes waste and increases efficiency. Special Formula: Contains special organic components for exceptional creeping properties, solvents for dissolving old deposits, and anti-rust and corrosion components that prevent further rust formation. Long Lasting Protection: A blend of high-quality oils and Bardahl's “polar attraction” formula provides long-lasting lubrication and protection, while unique high-pressure additives create a friction and wear-reducing oil film. Easy to Use: Suitable for treating rusted, dirty or stuck parts. Can be repeated for stubborn cases and protects parts from rusting again after installation. Bulk Pack for Immersion: In addition to spray application, also available in bulk packaging for immersion purposes, ideal for deeply treating rusted parts and providing long-term corrosion protection. Item number and Contents: Item number 73005, available in 500ml packs, suitable for various maintenance and protection needs in industrial applications.

Attribute Description Multifunctional Use: Bardahl Super Spray serves as a penetrating oil, lubricant, moisture remover, anti-corrosion spray and parts cleaner. Reduction of Friction and Wear: Effectively reduces friction and wear, loosens rusted parts and provides a protective lubricant film. Protection against Rust and Corrosion: Provides strong protection against rust and corrosion, essential for machine tools and industrial machines in harsh environments. Advanced Formulation: Contains a blend of organic ingredients with excellent creeping action and high-quality oils with Bardahl's 'polar attraction' formula. Technical Specifications: Temperatures from -39°C to 150°C, Flash point >61 °C, Density 1.099 g/cm³, Viscosity >20 mm²/s, Timken test >300 pnds. Application methods: To be sprayed on rusted parts; repeat for persistent cases. Immersing parts in bulk packaging possible for thorough treatment. Available Packaging: Available in 1 liter and 5 liter packages, suitable for various applications. Instructions for useThe product should be sprayed onto rusted, dirty or stuck parts . For persistent cases, the treatment can be repeated. When the parts are reassembled, it is recommended to spray them with the product to prevent rusting again.

Attribute Description Product description: Bardahl Speedy Gasket/gasket maker gray is a 1-component, fast-acting gasket of very high quality, designed to replace all kinds of gaskets and to work with various surfaces such as rubber, metal, wood, glass, ceramics and many types of plastic. Applications: Widely applicable in passenger cars, trucks, caravans, boats, and electronics for sealing gearboxes, water pumps, valve covers, steering racks, crankcases and protection against moisture for switches, sockets, and more. Temperature resistance: Excellent resistance to high temperatures, ranging from -50°C to 260°C, and offers resistance to extreme weather influences, brake fluids, mineral oils and greases. Instructions for use: Clean the surface and remove grease with Bardahl Bodysol, apply, join parts together, and final assembly after 30-40 minutes. Do not use on cylinder heads and exhaust manifolds. Avoid constant contact with gasoline. Curing and Drying Time: Curing from the outside in, influenced by heat and moisture. At 22°C and 60% relative humidity, a non-adhesive layer forms after 20 minutes. Complete curing after 24 to 72 hours depending on the layer thickness. Specific Applications: Used in the automotive industry for valve covers, crankcase covers, water pumps, and more. Suitable for seals in motorcycles, marine, electrical installations, and various other applications where a strong, durable seal is required. Analysis data: Density at 23°C: 1.24 g/cm³, Skin formation time at 23°C and 50% r.h.: 10-20 min, Hardness Shore A: 36, Temperature resistance: -50 / +260°C, Tensile strength: 3.0 N/mm², Dielectric strength: 21 kV/mm, Color: gray. Additional Information: Do not use for cylinder head and exhaust manifold gaskets. Avoid prolonged contact with petrol. Store in a cool place (below 20°C) with a storage period of 1 year. Simplifies the installation of water hoses and can serve as an insulation seal.

Characteristic Description Effective Microbial Protection: Effective against gram-positive and gram-negative bacteria, yeasts, fungi, and enveloped viruses, including influenza, HBV, and HIV. Certified Disinfection Efficacy: Listed by VAH for its certified disinfection performance. Regulatory Compliance: Registered under BAuA-Reg. N-36653 as a biocide. Always refer to the product label and information for proper usage. Food Safety Compliance: HACCP rated, ensuring suitability for food processing environments. Skin Moisturizing Ingredients: Contains glycerin and D-panthenol to hydrate and condition the skin, even with frequent use. Enhanced Skincare Benefits: Formulated with witch hazel extract and chamomile (α-bisabolol) to further soothe and protect the skin. Non-Greasy, Silicone-Free Formula: Alcoholic-aqueous gel with a non-greasy texture, free from silicone and preservatives, in compliance with EU regulations. Applications: Ideal for healthcare facilities, food processing areas, laboratories, and humid environments. Prevents skin softening under gloves or shoes during prolonged wear. Usage Instructions: Apply to clean, dry hands. Rub thoroughly, covering all areas, and allow to air dry before wearing gloves or resuming work. Avoid eye contact. Follow label instructions for safe use.

Attribute Description Active Ingredients: Bardahl Skin Care contains α-bisabolol, D-panthenol, keratin, vitamins A, E and natural oils such as almond and peanut oil for advanced skin care. Properties: Lightly greasy, easy to distribute and absorbs quickly. Contains special moisturizers that prevent dehydration. Dermatologically Tested: Skin Care is pH skin neutral, silicone-free and dermatologically tested, suitable for all skin types. Application: Use after mild to heavy skin strain, for care after frequent skin cleansing, for repair of damaged skin and maintenance of skin elasticity. Specific Data: White to light yellow O/W emulsion, pleasantly perfumed, pH value 5.5-6.5, density 0.85-1.0 g/cm³ at 20°C. Shelf life: Shelf life in closed condition at room temperature for a minimum of 24 months. Packaging options: Available in 1 liter soft-bottle and dispenser format, suitable for various usage conditions. Instructions for useAfter work, apply to clean, dry skin and rub in well. Skin Care can be applied to the entire body. Regular use is essential for maintaining healthy skin.

Bardahl Barrier Cream is used where many different active ingredients must be taken into account; this nourishing cream is sufficient. It also ensures good care of the hands. It prevents direct contact of harmful active ingredients with the skin and the penetration of contaminants deep into the skin. It reduces the burden on the skin and protects against possible allergies. This significantly simplifies the cleaning process of the most serious contamination, again reducing the burden on the skin. Consistent use of this hand cream will ensure less skin irritation and, in extreme cases, also less absenteeism due to illness. Bardahl Barrier Cream protects against moisture, cold, heat, but also against all kinds of solvents, acids, alkalis, oils, greases, lubricants, tar, bitumen, paint, ink, cement, lime, glue, PU sealants, sealants, rust, dyes and many other substances that are harmful to the hands. Bardahl Barrier Cream is dermatologically tested, pH skin neutral and has been extensively tested in practice.

Attribute Description Versatility: Bardahl Silicone Spray Lube is a multifunctional lubricant suitable for cars, home or office. It lubricates and protects plastic, rubber, metal and other surfaces. Sustainability: Resists washing, melting, freezing and dries quickly without sticking or staining. Corrosion protection: Delays rust formation and protects against saltwater corrosion, ideal for use in harsh environmental conditions. Specific Applications: Lubricates components such as car locks, hinges, and expels moisture in vehicle electrical systems. Protects sporting goods, garden tools and more. Rubber maintenance: Keeps rubber parts supple, protects against drying out and does not freeze at temperatures down to -40°C, ideal for winter conditions. Temperature resistance: Withstands temperatures from -40°C to +200°C, suitable for extreme climatic conditions. Pack size: Available in a 400 ml spray can, useful for both professional and personal use. Instructions for useSpray the product from a distance of 30 cm onto a clean and dry surface.

Attribute Description Quick Shine: Easily apply and wipe off for an instant and glossy finish on vehicles and furniture. Long Lasting Protection: Protects against everyday dirt, bird droppings and resin. Recommended to quickly remove bird droppings to preserve the paint. Versatile Application: Suitable for car paints, chrome, copper, artificial leather and other plastics. Ideal for cars, trucks, boats, caravans, and garden furniture. Safety instructions: Keep away from hot parts and open flames. Use the product in well-ventilated areas or outdoors. Active Ingredient: Carnauba wax, provides an excellent protective and glossy layer on treated surfaces. Storage conditions: Store in cool (10°C - 20°C) and dry conditions for optimal quality retention. Pack size: Available in a 200 ml spray, convenient for use and storage. Instructions for use: Shake the bottle well before use. Spray evenly on a clean and dry surface. Spread the product evenly over the surface until the desired shine is achieved. For best results, use a microfiber cloth (washable).

Attribute Description High-quality bonding agent: Bardahl Retainer R138 is a 1-component filler and locking agent with a high viscosity, designed for assembly applications where high strength is required, such as in mechanical connections. Scope of application: Suitable for mounting coaxial components such as bearings, shift shafts, and rotors. Increases the load on cylindrical connections with minimal tightening torques, reducing installation costs. Widely applicable: Locks long keys, key teeth, and improves the fits of worn parts with excessive tolerance. Not suitable for very close fitting parts without primer for large fill. Analytical Data: Color: Green, Viscosity: 2000 cPs, Tensile strength at break: 28 Nm, Temperature range: -50° to 150°C, Drying time: 10-30 min, Full cure: 24 hours, Type III military grade. Anaerobic Action: Increases the strength of precision-fitting parts, seals against moisture, penetration, and corrosion, and prevents spontaneous loosening due to vibration. Item number and Contents: Item number 97021 with a capacity of 50 ml. Instructions for use:Make sure the parts are dry and clean. Using a primer can shorten drying time if necessary

Attribute Description Product description: Bardahl Radiator Stop Leak is designed to stop leaks in the cooling system. It combines sealants, corrosion inhibitors and anti-scale ingredients to effectively stop leaks in the radiator, hoses, heater, water jacket and cylinder head. The Problem: Lowering coolant levels and leaks in the cooling system can lead to overheating and other engine problems. Bardahl Radiator Stop Leak offers a solution for small leaks and cracks in the cooling system. The Operation: Scientific combination of filling, sealing and guiding to combat leaks. Seals holes and cracks and hardens on contact with air, creating a durable and flexible seal. Benefits: Seals holes and cracks in the radiator, lubricates and protects the cooling system and softens parts. Product information: Item number: 14001, Contents: 300 ml. Instructions for use: Shake the can well. Pour the contents into the radiator. Let the engine idle for 10 minutes or drive with the heater on high. For larger cooling systems or leaks, use two cans. For maximum results, first rinse with Bardahl Radiator Fast Flush.

Attribute Description High Pressure Resistance: A tight lubricating film on the material with exceptional high-pressure properties, promoting lubrication under extreme conditions. Water Repellency: Excellent water-repellent properties, resistant to degradation by water or steam, ideal for use in humid environments. Corrosion resistance: Provides a lubricating film with exceptional anti-corrosion properties, suitable for use in various environmental conditions. Low Freezing Point: Low freezing point allows lubrication of machines and equipment working in the open air, effectively even in cold climates. Energy savings: Leads to lower energy consumption through reduced friction, resulting in more efficient device operation. Sustainability and Efficiency: Reduces the need for frequent oil changes by delayed lubricant aging, allowing for longer lubrication intervals. Packaging and Contents: Available in a easy to use small package, item number 53001, contents 100 ml, suitable for specific applications and smaller devices. Instructions for use Make sure the machine or device is turned off and disconnected from any power source. Clean the targeted parts of dirt or old lubricant. Shake the Bardahl Precision Oil container well and then apply a few drops to the necessary mechanical parts, using a nozzle or extension tube for hard-to-reach areas. Reconnect the power source and run the machine briefly to distribute the oil evenly. Regularly inspect the lubrication level and reapply Bardahl Precision Oil if necessary. Store the oil in a cool, dry place, away from direct sunlight and ensure that the empty container is disposed of properly, in accordance with local regulations. 

Bardahl Power TS Syntronic Motor Oil is a special fully synthetic, ashless, two-stroke motor oil. This oil is biodegradable and has a higher quality than prescribed by the leading outboard motor manufacturers. It exceeds the lubrication requirements of water-cooled outboard engines and air-cooled engines that are heavily loaded and have to run at high speed for long periods of time. Bardahl Power TS Syntronic Motor Oil meets strict lubrication regulations as established by the National Marine Manufacturer's Association: NMMA/BIA TC-W3. The name Bardahl gives the user extra security above that of other outboard motor oils. Bardahl Power TS Syntronic Motor Oil combines the maximum performance of ashless additives with the high quality of clean-burning base oils. This combination ensures that the spark plugs remain clean, no deposits form and the exhaust ports remain clean and free of rust. Bardahl Power TS Syntronic Motor Oil can be mixed with all types of gasoline. Category Description Specification API - TC+ | CEC - L-33-A-93 | NMMA - TC-W3 Special features Biodegradable – environmentally friendly

Attribute Description Application: Stops power steering leaks and restores power steering oil level. Properties: Stops oil leaks, makes gaskets flexible, prevents oil seepage, reduces noise and vibrations, and withstands high temperatures and pressures. Compatibility: Suitable for use with various types of power steering and gearbox oils, including LHM systems. Manufacturer Recommendations: Recommended by most automotive manufacturers for use in power steering systems. Instructions for use: Pour a maximum of one can (300ml) into the power steering reservoir. Caution: do not exceed the maximum permitted oil level. Oil recovery: Restores the properties of the oil by adding new additives, extends the life of the power steering components. Product details: Item number 1755B, Contents 300 ml.

Bardahl Nautic Super Outboard TCWIII Motor Oil is a two-stroke oil with a higher quality than recommended by the leading manufacturers of outboard motors. It exceeds the lubrication requirements of water-cooled outboard engines and air-cooled engines that are heavily loaded and have to run at high speed for long periods of time. Bardahl Nautic Super Outboard TCWIII Motor Oil meets the strict lubrication regulations as established by the National Marine Manufacturer's Association and the Boating Industry Association: NMMA/BIA TC-W3. Category Description Specification NMMA - TC-W3 | OMC - 40/70 Suitable for: All two-stroke engines that require an ashless oil, such as outboard motors, snowmobiles, jet skis and two-stroke snow plows. Also suitable for lawn mowers, trimmers, leaf blowers, chainsaws and motorcycles.

The exclusive BARDAHL POLAR PLUS - Fullerene C60 formula forms a triple protective layer. The excellent anti-wear and anti-foam EP properties provide a perfect lubrication and excellent protection of gears under the most severe conditions. Note: Follow the manufacturer's instructions at all times, which can be found in your service book.

Attribute Description Engine wear reduction: Results show that Bardahl Oil Booster reduces engine wear by 10% to 40%, according to tests conducted by YORK Research and others. Friction: Reduces friction in engines, resulting in less wear and lower fuel consumption. Wear reduction at Start: Helps prevent wear during and immediately after starting, when engines are most vulnerable. Oil oxidation: Contains oxidation inhibitors that improve oil stability, slow oil oxidation and reduce precipitate formation. Turbo Protection: Optimizes the lubrication of turbos, prevents oxidation and protects against extreme temperatures and pressure. Fuel economy: Improved lubrication ensures better combustion and higher performance, resulting in fuel savings. Instructions for use: Use between 2 oil changes, to replace regular oil top-ups. Provides improved lubrication of critical engine components.