Bardahl XTSI can be used in automatic oil injection systems as well as in systems requiring pre-mixing with fuel.  Bardahl XTSI exceeds the TSC-3 requirements and meets the requirements of manufacturers such as Kawasaki, Suzuki and Yamaha. and is also suitable for mopeds, lawn mowers, chain saws, light outboard engines, etNote: always follow the manufacturer's instructions, which can be found in your maintenance booklet.

Bardahl XTM 10W40 Syntronic is a selected mixture of compound hydrocarbons and carefully selected esters. This fully synthetic engine oil has the following properties:⎯ A high and stable viscosity index⎯ Optimal friction properties⎯ A strong anti-wear, anti-corrosion and anti-foaming ability⎯ A very good deterging and dispersing effectBardahl XTM Syntronic motorcycle oil contributes to lower fuel consumption (due to reduced friction), lower oil consumption, longer intervals, and longer filter life. This oil is designed to improve emissions and reduce wear and tear for longer engine life. The product has exceptional stability at high temperatures, with perfect lubrication under varying engine loads and in critical ambient temperature applications. It also ensures an easy start at temperatures below zero. 

Bardahl XTM 20W50 Multigrade is a modern multigrade engine oil that is tuned to today's 4-stroke engines and gearboxes of motorcycles. The special composition of this motorcycle oil makes it possible for engines to function optimally under the most diverse conditions. 

Bardahl XTM 15W50 Syntronic is geformuleerd om aan de stijgende strenge vereisten van moderne motoren in motorfietsen te voldoen. Bardahl XTM 15W50 Syntronic is een geselecteerd mengsel van samengestelde koolwaterstoffen en zorgvuldig geselecteerde esters.

Bardahl XTM 15W50 semi synthetic has been developed especially for the lubrication of motorcycle engines. The use of this synthetic reinforced oil ensures that at very low and very high temperatures there is always a protective, strong lubricating film on the engine parts. This oil exceeds the APIs highest requirements regarding motorcycles. 

Bardahl XTM 10W40 semi synthetic has been developed especially for the lubrication of motorcycle engines. The use of this synthetic reinforced oil ensures that at very low and very high temperatures there is always a protective, strong lubricating film is present on the engine parts. This oil exceeds the API's highest requirements for motorcycles.

Attribute Description Minimal Oil Oxidation: Contains components that reduce oxidation, limiting the formation of gum and varnish. Foam formation Reduced: Special anti-foam components ensure minimal foam formation, even under extreme conditions of use. Protection against Hardening of Gaskets: Helps keep gaskets flexible, prevents leaks and protects against contamination by sand, water and dirt. Low Part Wear: Contains anti-wear components that minimize the wear of shock absorber parts, even with heavy contamination. Corrosion protection: Includes corrosion inhibitors that protect against rust formation on critical shock absorber parts. High Viscosity Index: Provides 'multigrade' properties through a high viscosity index, ensuring consistent damping across different temperatures. Specific Applications: Designed for maximum damping of motorcycle front forks and shock absorbers, with damping adjustment options due to variation in viscosity. Available Packaging: Available in 500 ml, 5 liter, 25 liter, and 60 liter packages, to meet various needs.

Attribute Description Minimal Oil Oxidation: Contains components that reduce oxidation, limiting the formation of gum and varnish. Foam formation Reduced: Special anti-foam components ensure minimal foam formation, even under extreme conditions of use. Protection against Hardening of Gaskets: Helps keep gaskets flexible, prevents leaks and protects against contamination by sand, water and dirt. Low Part Wear: Contains anti-wear components that minimize the wear of shock absorber parts, even with heavy contamination. Corrosion protection: Includes corrosion inhibitors that protect against rust formation on critical shock absorber parts. High Viscosity Index: Provides 'multigrade' properties through a high viscosity index, ensuring consistent damping across different temperatures. Specific Applications: Designed for maximum damping of motorcycle front forks and shock absorbers, with damping adjustment options due to variation in viscosity. Available Packaging: Available in 500 ml, 5 liter, 25 liter, and 60 liter packages, to meet various needs.

Attribute Description Minimal Oil Oxidation: Contains components that reduce oxidation, limiting the formation of gum and varnish. Foam formation Reduced: Special anti-foam components ensure minimal foam formation, even under extreme conditions of use. Protection against Hardening of Gaskets: Helps keep gaskets flexible, prevents leaks and protects against contamination by sand, water and dirt. Low Part Wear: Contains anti-wear components that minimize the wear of shock absorber parts, even with heavy contamination. Corrosion protection: Includes corrosion inhibitors that protect against rust formation on critical shock absorber parts. High Viscosity Index: Provides 'multigrade' properties through a high viscosity index, ensuring consistent damping across different temperatures. Specific Applications: Designed for maximum damping of motorcycle front forks and shock absorbers, with damping adjustment options due to variation in viscosity. Available Packaging: Available in 500 ml, 5 liter, 25 liter, and 60 liter packages, to meet various needs.

Attribute Description Minimal Oil Oxidation: Contains components that reduce oxidation, limiting the formation of gum and varnish. Foam formation Reduced: Special anti-foam components ensure minimal foam formation, even under extreme conditions of use. Protection against Hardening of Gaskets: Helps keep gaskets flexible, prevents leaks and protects against contamination by sand, water and dirt. Low Part Wear: Contains anti-wear components that minimize the wear of shock absorber parts, even with heavy contamination. Corrosion protection: Includes corrosion inhibitors that protect against rust formation on critical shock absorber parts. High Viscosity Index: Provides 'multigrade' properties through a high viscosity index, ensuring consistent damping across different temperatures. Specific Applications: Designed for maximum damping of motorcycle front forks and shock absorbers, with damping adjustment options due to variation in viscosity. Available Packaging: Available in 500 ml, 5 liter, 25 liter, and 60 liter packages, to meet various needs.

Attribute Description Minimal Oil Oxidation: Contains components that reduce oxidation, limiting the formation of gum and varnish. Foam formation Reduced: Special anti-foam components ensure minimal foam formation, even under extreme conditions of use. Protection against Hardening of Gaskets: Helps keep gaskets flexible, prevents leaks and protects against contamination by sand, water and dirt. Low Part Wear: Contains anti-wear components that minimize the wear of shock absorber parts, even with heavy contamination. Corrosion protection: Includes corrosion inhibitors that protect against rust formation on critical shock absorber parts. High Viscosity Index: Provides 'multigrade' properties through a high viscosity index, ensuring consistent damping across different temperatures. Specific Applications: Designed for maximum damping of motorcycle front forks and shock absorbers, with damping adjustment options due to variation in viscosity. Available Packaging: Available in 500 ml, 5 liter, 25 liter, and 60 liter packages, to meet various needs.

Attribute Description Minimal Oil Oxidation: Contains components that reduce oxidation, limiting the formation of gum and varnish. Foam formation Reduced: Special anti-foam components ensure minimal foam formation, even under extreme conditions of use. Protection against Hardening of Gaskets: Helps keep gaskets flexible, prevents leaks and protects against contamination by sand, water and dirt. Low Part Wear: Contains anti-wear components that minimize the wear of shock absorber parts, even with heavy contamination. Corrosion protection: Includes corrosion inhibitors that protect against rust formation on critical shock absorber parts. High Viscosity Index: Provides 'multigrade' properties through a high viscosity index, ensuring consistent damping across different temperatures. Specific Applications: Designed for maximum damping of motorcycle front forks and shock absorbers, with damping adjustment options due to variation in viscosity. Available Packaging: Available in 500 ml, 5 liter, 25 liter, and 60 liter packages, to meet various needs.

Attribute Description Effective Cleansing: Bardahl Wheel Cleaner is an effective rim cleaner for both alloy wheels and steel rims, designed to quickly and thoroughly remove road grime and brake dust. Safe for paintwork: The special formula protects against damage to the protective paint on the rims and contains no harmful acids, safe for use on paint and aluminum. Improved Formula: The unique formula of the product ensures that it remains effectively on the rim during cleaning, resulting in economical use. Instructions for use: Spray the cleaner onto the rims and let it work for a while. If the rim is heavily soiled, use a brush or sponge and then rinse the rim with water. Acid-free: Contains no acids, making it a safer alternative than many traditional acid-based wheel cleaners. Product variations: Available in packs of 500 ml, 5 liters and 25 litres, suitable for both occasional and frequent use.

Bardahl VBA Syntronic 2 stroke oil is a self-mixing two-stroke oil that is often prescribed in scooters with two-stroke engines. Note: always follow the manufacturer's instructions, which can be found in your maintenance booklet .

Bardahl VBA Synthetic Scooter can be used in any air-cooled 2-stroke engines such as those of scooters, snowmobiles, lawn mowers, pumps, etc. Note: always follow the factory instructions, which can be found in your maintenance booklet.

Bardahl VBA 100 Synthetic 2-takt is ontwikkeld om gebruikt te kunnen worden in alle soorten tweetaktmotoren zoals: brommers, karts, kettingzagen, grasmaaimachines, elektrische generatoren, pompen maar ook brommers.  Bardahl VBA 100 Synthetic 2-takt kan gebruikt worden tot een mengverhouding van 1:100, met een toerental onder 6000 RPM of al naar gelang de voorschriften van de constructeur van de motor (zie gebruiksaanwijzing op de verpakking). Let op: volg ten alle tijden de fabrieksvoorschriften, welke te vinden zijn in uw onderhoudsboekje.

Attribute Description Multifunctional Use: Bardahl Super Spray serves as a penetrating oil, lubricant, moisture remover, anti-corrosion spray and parts cleaner. Reduction of Friction and Wear: Effectively reduces friction and wear, loosens rusted parts and provides a protective lubricant film. Protection against Rust and Corrosion: Provides strong protection against rust and corrosion, essential for machine tools and industrial machines in harsh environments. Advanced Formulation: Contains a blend of organic ingredients with excellent creeping action and high-quality oils with Bardahl's 'polar attraction' formula. Technical Specifications: Temperatures from -39°C to 150°C, Flash point >61 °C, Density 1.099 g/cm³, Viscosity >20 mm²/s, Timken test >300 pnds. Application methods: To be sprayed on rusted parts; repeat for persistent cases. Immersing parts in bulk packaging possible for thorough treatment. Available Packaging: Available in 1 liter and 5 liter packages, suitable for various applications. Instructions for useThe product should be sprayed onto rusted, dirty or stuck parts . For persistent cases, the treatment can be repeated. When the parts are reassembled, it is recommended to spray them with the product to prevent rusting again.

Bardahl Running In motoroliën zijn laaggedoopte hoogwaardige solvent geraffineerde motoroliën zonder de viscositeitsindex-verbeteraars zoals die in multigrade oliën worden toegepast. Deze inloop motorolie is ontworpen voor gereviseerde motoren en bevat additieven die oxidatie, slijtage en corrosie tegengaan. De olie is dusdanig samengesteld dat de zuigerveren en cilinders snel en effectief inslijten. Geschikt voor benzine en dieselmotoren met en zonder turbo. Gebruiksduur is afhankelijk van de toepassing en ligt tussen de 100 en 200 uur.Specificaties Bardahl Running In HD30- API CF-4/SG- CATERPILLAR TO-2- MAN 270- MB 227/228-  MIL MIL-L-2104 E/MIL-L-46152 E- ZF TE-ML 03A/TE-ML 06A/TE-ML 07D

Attribute Description Application: Designed for reconditioned engines for quick and effective break-in. Suitable for petrol and diesel engines, with and without turbo, during overhaul or periodic maintenance. Duration of Use: Depending on the application between 100 and 200 hours. Specifications: ACEA - E2/E1, API - CF-4/SG, CATERPILLAR - TO-2, MAN - 270, MIL - L-2104 E, MIL - L-46152 E, MB - 227.0, MB - 228.0, ZF - TE-ML 03A, ZF - TE-ML 06A, ZF - TE-ML 07D Viscosity and Analysis data: Viscosity at 100°C is 8.5 mm²/s and at 40°C is 60 mm²/s. The viscosity index is 112. Viscosity at -10°C is 1900 mpa/s. Acidity (TAN) is 2.1 mg KOH/g, total base number (tbn) is 11 mg KOH/g, and the pour point is -33°C. Specific gravity at 15°C is 0.885 g/ml. Flashpoint and firepoint are 216°C and 236°C respectively. Available Packaging: Available in 5 liter, 25 liter and 60 liter packages.

A special lubricant for the Primary Chaincase of Harley Davidson Big-Twin motorcycles. The high quality of this lubricant ensures maximum and durable protection under all operating and climatic conditions. Suitable for models from 1984 and later (FL, FLT, FX and FXR) with a wet diaphragm spring clutch.

Attribute Description High Pressure Resistance: A tight lubricating film on the material with exceptional high-pressure properties, promoting lubrication under extreme conditions. Water Repellency: Excellent water-repellent properties, resistant to degradation by water or steam, ideal for use in humid environments. Corrosion resistance: Provides a lubricating film with exceptional anti-corrosion properties, suitable for use in various environmental conditions. Low Freezing Point: Low freezing point allows lubrication of machines and equipment working in the open air, effectively even in cold climates. Energy savings: Leads to lower energy consumption through reduced friction, resulting in more efficient device operation. Sustainability and Efficiency: Reduces the need for frequent oil changes by delayed lubricant aging, allowing for longer lubrication intervals. Packaging and Contents: Available in a easy to use small package, item number 53001, contents 100 ml, suitable for specific applications and smaller devices. Instructions for use Make sure the machine or device is turned off and disconnected from any power source. Clean the targeted parts of dirt or old lubricant. Shake the Bardahl Precision Oil container well and then apply a few drops to the necessary mechanical parts, using a nozzle or extension tube for hard-to-reach areas. Reconnect the power source and run the machine briefly to distribute the oil evenly. Regularly inspect the lubrication level and reapply Bardahl Precision Oil if necessary. Store the oil in a cool, dry place, away from direct sunlight and ensure that the empty container is disposed of properly, in accordance with local regulations. 

Attribute Description Multi-Purpose Cleaner: Powerful, multi-functional cleaner suitable for motorcycles, scooters, bicycles and more, effective in dissolving various types of dirt. Efficient Dirt Removal: Fast-acting formula that effortlessly loosens mud, static dirt and deposits on derailleurs; effective against oil and grease residues on rims and moving parts. Safe for Materials: Safe to use on chrome, paint and aluminum. Effective on alloy and plastic rims without risk of damage. Environmentally friendly: Biodegradable with a degradation rate of 90% according to the CEC L-33-T-82 test; environmentally friendly product. Available Packaging: Available in 500 ml, 5 liter and 25 liter packages, suitable for various applications. Instructions for useSpray the parts to be treated and let the product work for about 3 minutes. Then drive through the car wash or wash the car with a brush or sponge. In case of heavy contamination, it is recommended to pre-treat contaminated areas with a brush. 

Attribute Description Chemical Advanced Lubricant: Bardahl Foamy Chain Lube is a concentrated lubricant, a mixture of organic metallurgical components with exceptional high-pressure properties. Optimal Adhesion and Protection: Bardahl's famous formula covers the chains with an unbreakable oil film, which ensures optimal lubrication and protection against wear. Resistant to Harsh Conditions: Resistance to very high temperatures and pressures; insensitive to water and currents; provides protection against rust and corrosion. Unique Features: Creeping property that ensures that the lubricant penetrates deep into the hard-to-reach points of chains and links. Lifespan extension: Designed to significantly extend the life of all types of chains, including those with and without O-rings. Available Packaging: Available in 400 ml packaging, suitable for various applications, from motorcycles to industrial conveyor belts. Instructions for useShake well before use and then spray onto the parts to be treated, at least Spray the chain 24 hours before use to allow the oil to adhere. Do not wipe off excess product immediately as the solvent will evaporate to leave a protective film.

This Bardahl motor oil is suitable for all oldtimer HD models up to 1985 (excl. Evolution). Thanks to Bardahl's unique blending method, this oil meets both an SAE 50 and SAE 60 specification. This makes changing oil in summer and winter unnecessary and therefore saves costs. Suitable for Harley Davidson - Norton - BSA - Indian - Triumph - Panther - Ariel Suitable for all USA and British classic motorcycles Follow the manufacturer's instructions Specifications API Service SF Application This Bardahl motor oil is suitable for all oldtimer HD models up to 1985 (excl. Evolution). Thanks to Bardahl's unique blending method, this oil meets both an SAE 50 and SAE 60 specification. This makes changing oil in summer and winter unnecessary and therefore saves costs.