Threadlock T142

Attribute Description Very Strong Locking Agent: Bardahl Threadlock T171 is a thread locking agent that prevents vibrations, leakage and corrosion. Suitable for sealing and securing threaded ends up to M36, provides very strong adhesion but remains removable. Scope of application: Eliminates the need for various tools and welds in hard-to-reach places. Intended for permanently secured connections with fine to medium threads. Unique Features: Recognizable by its green color and chemically inert, ideal for use in extreme environments such as cold stores, and industries with corrosive chemicals. Benefits: ISO9000 and 9001 certified, provides excellent shelf life, consistent performance, prevents leakage and corrosion, and does not affect hydraulic/pneumatic systems. Anaerobic Action: Fills irregularities for better power transmission, prevents spontaneous loosening due to vibration, and provides a moisture, penetration and corrosion resistant seal. Analytical Data: Characterized by a green color, a viscosity of 4000-6000 cPs, tensile strength at break of 17/8 Nm, applicability at temperatures from -50° to 130°C, and a full curing time of 24 hours. Item number and Contents: Item number 97011 with a capacity of 50 ml.

Attribute Description Specific Bonding Agent: Bardahl Threadlock T442 is designed for sealing and securing threaded ends of metal pipes and fittings within pneumatic and hydraulic systems up to R ¾”. It is semi-permanent and demountable. Scope of application: Suitable for use on parts with fine to medium threads that require semi-permanent locking. Benefits: Manufactured under ISO9000 and 9001 with excellent durability and consistent performance on both active and inactive surfaces, without compromising the hydraulic and pneumatic systems. Analytical Data: Characterized by a brown color with a viscosity of 400-700 mPas, a temperature range of -50° to 130°C, and a maximum wire diameter of 0.15mm. Curing time varies from 10-20 minutes for initial strength to 3-6 hours for full cure. Anaerobic Action: Fills microscopic irregularities for better power transmission, prevents spontaneous loosening due to vibration, and provides a moisture, penetration and corrosion resistant seal. Item number and Contents: Item number 97031 with a capacity of 50 ml. Instructions for use: Recognisable by its brown color. Make sure parts are clean and dry before use. Disassembly is simplified with heat. The use of primers is possible, but can reduce the bonding strength by up to 30%.

Attribute Description High-quality bonding agent: Bardahl Retainer R138 is a 1-component filler and locking agent with a high viscosity, designed for assembly applications where high strength is required, such as in mechanical connections. Scope of application: Suitable for mounting coaxial components such as bearings, shift shafts, and rotors. Increases the load on cylindrical connections with minimal tightening torques, reducing installation costs. Widely applicable: Locks long keys, key teeth, and improves the fits of worn parts with excessive tolerance. Not suitable for very close fitting parts without primer for large fill. Analytical Data: Color: Green, Viscosity: 2000 cPs, Tensile strength at break: 28 Nm, Temperature range: -50° to 150°C, Drying time: 10-30 min, Full cure: 24 hours, Type III military grade. Anaerobic Action: Increases the strength of precision-fitting parts, seals against moisture, penetration, and corrosion, and prevents spontaneous loosening due to vibration. Item number and Contents: Item number 97021 with a capacity of 50 ml. Instructions for use:Make sure the parts are dry and clean. Using a primer can shorten drying time if necessary