Body Coating Black

Attribute Description Specially Developed Coating: Bardahl Body Coating is a high-quality coating based on synthetic resins and rubbers, designed for stone chip protection of body parts such as spoilers, door sills and sides. Quick-drying and Elastic: This fast-drying formula forms a closed, elastic film that provides excellent protection against rust and stone chips, with a recommended layer thickness of approximately 1mm. Excellent Adhesion: Provides excellent adhesion and can be repainted with any type of paint system without the risk of bleeding through, compatible with synthetic resin paints as well as 2K and nitro paints. Tixotropic Properties: The thixotropic properties ensure that the product can be applied without dripping, which guarantees a neat and efficient application. Packaging and Handling: Packed in 1 liter screw-on bottles, available in white, gray and black. The optimal working pressure for application is 3-5 bar. Analysis and Test Data: Density at 20°C is 1.04 kg/l, viscosity 8000 +/- 2000 cP. The coating has a solids content of 44-47% and has been tested in a salt spray test for 200 hours. Instructions for use:Shake the can well before use. Apply at room temperature on clean and dry surfaces. Cover areas not to be treated. Can be diluted with white spirit. Pressure: 3-8 bar. Clean the spray gun carefully after use. There is a chance that the bus will explode due to clogged nozzles.

Attribute Description Specially Developed Coating: Bardahl Body Coating is a high-quality coating based on synthetic resins and rubbers, designed for stone chip protection of body parts such as spoilers, door sills and sides. Quick-drying and Elastic: This fast-drying formula forms a closed, elastic film that provides excellent protection against rust and stone chips, with a recommended layer thickness of approximately 1mm. Excellent Adhesion: Provides excellent adhesion and can be repainted with any type of paint system without the risk of bleeding through, compatible with synthetic resin paints as well as 2K and nitro paints. Tixotropic Properties: The thixotropic properties ensure that the product can be applied without dripping, which guarantees a neat and efficient application. Packaging and Handling: Packed in 1 liter screw-on bottles, available in white, gray and black. The optimal working pressure for application is 3-5 bar. Analysis and Test Data: Density at 20°C is 1.04 kg/l, viscosity 8000 +/- 2000 cP. The coating has a solids content of 44-47% and has been tested in a salt spray test for 200 hours. Instructions for use:Shake the can well before use. Apply at room temperature on clean and dry surfaces. Cover areas not to be treated. Can be diluted with white spirit. Pressure: 3-8 bar. Clean the spray gun carefully after use. There is a chance that the bus will explode due to clogged nozzles.

Professional spray gun for spraying intercoating ML or Wax 1 liter.

Attribute Description Anti-corrosion Properties: Bardahl Intercoating ML offers effective corrosion protection for cavities in car bodies such as doors and box beams, thanks to its composition with basic raw materials that penetrate strongly. Penetration and Protection: Specially developed to treat hard-to-reach bodywork parts, creating a dry, non-adhesive film with a layer thickness of 20-40 microns. Temperature resistance: The film is amber-colored, transparent and has excellent temperature resistance, allowing protection of the trunk lid and hood. Versatility: In addition to application on car bodies, Bardahl Intercoating ML can also be used for the protection of metal parts, surfaces and tools during storage and transport. Processing: Available in 1 liter screw-on bottles, suitable for processing with ML spray guns. Analysis data: Density at 20°C: 0.86 ± 0.02 Kg/l, Viscosity: 30 ± 5 sec, Flash point: >39°C, Salt spray test: 200 hours according to DIN 50021. Available Packaging: Available in 500 ml (spray), 1 liter, and 5 liter packages, to meet different usage needs. Instructions for use:Cover the surface not to be treated with paper. Shake the can well. Spray at room temperature from a distance of 30-40 cm. Spray in thin layers. After use, turn the can over and flush until only gas escapes, this cleans the spray cap. Bardahl Intercoating ML can be easily removed with white spirit, making maintenance and cleaning easy.

Attribute Description Anti-corrosion Properties: Bardahl Intercoating Wax provides high-quality corrosion protection for hollow bodywork spaces, such as doors and box beams, by forming a dry, non-adhesive film with a thickness of 20-40 microns. Strong Penetration: Made from basic raw materials with strong penetrating properties for durable treatment of hard-to-reach body parts. Temperature resistance: Excellent temperature resistance allows the bonnet and boot lid to be treated, operating from -30º C to 75º C, with a peak temperature of 85º C. Processing information: Available in 1 liter universal screw-on bottles and in packages of 500 ml and 5 liters for use with normal spray guns and ML spray guns. Easy Removal: Can be easily removed with White Spirit, adding to ease of use. Analysis and Test Data: Solids content of 49-54%, density at 20°C is 0.84 kg/l. Excellent results in salt spray tests up to 1000 hours with a rating of Ri 1. Available Packaging: Available in 500 ml, 1 liter and 5 liter packages, suitable for various applications. Instructions for useRemoves rust and dirt from the parts to be treated. Cover the surface not to be sprayed with paper. Shake the can well before use. Spray at room temperature from a distance of 30-40 cm. Spray in thin layers. The injection is done with a special gun through existing openings or drilled holes. Drill holes can be closed with plastic caps. Use 1 to 3 liters depending on the vehicle type.

Attribute Description Scope of application: It provides a new and neat appearance to car rims and many other surfaces, protects against corrosion and damage by brine. Properties: Suitable for indoor and outdoor use, quick-drying, long-lasting and corrosion-resistant. Environmentally friendly: Aerosol can is filled with environmentally friendly gas. Product specifications: Item number: 64604, Contents: 400 ml. Instructions for use:Cover the surface not to be sprayed with paper. Shake the can of Bardahl Aluminum Wheelpaint well. Spray at room temperature from a distance of 30-40cm. Spray in thin layers. After use, turn the can over and flush until only gas escapes, this cleans the spray head. This aerosol can is filled with environmentally friendly gas.

Attribute Description Application: High-quality, fast-drying lacquer for indoor and outdoor use, designed to give all types of surfaces a renewed and attractive appearance with a durable finish. Quick drying: Dries in minutes to a hard, well-covering base that has a long life and offers good resistance to rust. Anti-corrosion: Provides effective protection against corrosion, for both indoor and outdoor applications. Instructions for use: Remove rust and dirt from the parts to be treated. Cover surfaces not to be sprayed with paper. Shake the can well and spray in thin layers from a distance of 30-40cm. After use, turn the can over and flush it to clean the spray head. Environmentally friendly: The aerosol can is filled with environmentally friendly gas, making it less harmful to the environment. Product details: Item number 64104, content 400 ml. Specifically designed for durability and resistance to weather influences.